施耐德Power Electronics Hardware, Experienced Design Engineer
任职要求
1) Strong interpersonal skills is a must. The position requires closely working with eCADs, Mechanical CADs, software, certification, Industrialization, validation, internal Schneider Plant as well as outside vendors (EMS plant etc.). 2) Digital/Analogue embedded system design capability. Mandatory: - Familiar with Mentor or Cadence tools. - Experience with high speed embedded hardware system design. - Experience with analogue signal chain design, data acquisition design. - Familiar with solving EMC/EMI related issue. - Experience with Blank PCB/PCBA manufacture. - Strong lab skills with hands on soldering components, operating oscilloscopes, logic analyzers, signal generators etc. Optional: - Experience with power supply design is a plus. - Be a main desig…
工作职责
1) Strong interpersonal skills is a must. The position requires closely working with eCADs, Mechanical CADs, software, certification, Industrialization, validation, internal Schneider Plant as well as outside vendors (EMS plant etc.). 2) Digital/Analogue embedded system design capability. Mandatory: - Familiar with Mentor or Cadence tools. - Experience with high speed embedded hardware system design. - Experience with analogue signal chain design, data acquisition design. - Familiar with solving EMC/EMI related issue. - Experience with Blank PCB/PCBA manufacture. - Strong lab skills with hands on soldering components, operating oscilloscopes, logic analyzers, signal generators etc. Optional: - Experience with power supply design is a plus. - Be a main designer in one or more project is a plus. - Familiar with uboot/Linux Porting based on POWER PC or SOC is a plus. - Deep knowledge of complex processor embedded system design is a plus. - Familiar with Design of Current/Votage Transformer is a plus 3) FPGA design capability Mandatory: - RTL(Register Transfer Level) design, familiar with ISE, Quartus, Modelsim tools; - Test bench development and design simulation; Optional: - Experience with System on chip (SOC) and NIOS II design is a plus. 4) Must be a self-motivated team player with good oral and written English communication skills, and strong sense of ownership. 5) BS, MS(Preferred) in Electrical Engineering, at least 3 years for dedicated hardware development, board bring-up experience.
Position Summary We are seeking a innovative Power Electronics Hardware Engineer to join our core R&D team. You will lead the main topology design, component selection, and validation of power electronic converters for new power systems, guiding the product until its successful mass production. You will be a key contributor to achieving high performance, high reliability, and cost competitiveness in our products. Key Responsibilities 1. Main Circuit Design and Simulation: Responsible for the design, evaluation, and innovation of main power conversion topologies (e.g., AC/DC, DC/DC, DC/AC stages). Use simulation tools (e.g., PSPICE, LTspice, Saber, PLECS) for circuit simulation, including loop stability analysis, switching process analysis, and loss analysis, providing a theoretical basis for designs. Lead the design, calculation, and technical liaison with suppliers for key magnetic components (e.g., transformers, inductors). 2. Component Selection, Validation, and Lifespan Analysis: Responsible for the selection, evaluation, and testing of key components such as power semiconductors (IGBT, SiC MOSFET, GaN HEMT), capacitors, and magnetic components. Develop component validation test plans, and perform in-depth analysis of device characteristics, reliability, and potential failure modes. Conduct board-level power consumption and thermal analysis, collaborating with Structural/Thermal engineers to ensure system thermal design meets targets. 3. Board Design and Debugging: Lead or deeply participate in schematic design, and define PCB layout rules (especially for high-voltage, high-current, and sensitive signal sections). Guide Layout engineers to complete PCB design, ensuring it meets safety, EMC, thermal, and manufacturability requirements. Independently perform hardware board-level debugging, locate and resolve hardware issues, and conduct comprehensive validation of prototype performance and reliability. 4. Safety & EMC Design and Compliance: Strictly implement safety standards (e.g., UL 1741, IEC 62109) in hardware design, ensuring compliance with requirements like creepage and clearance distances. Consider EMC from the design source, formulate and implement EMC design schemes, and lead pre-compliance testing and troubleshooting/rectification during formal certification tests. 5. Test Validation and Production Transfer Support: Develop detailed hardware test plans, and execute design verification, system verification, and reliability testing. Analyze test data, write test reports, and be responsible for the completeness and accuracy of hardware design documentation. Support New Product Introduction (NPI), resolve hardware technical issues during pilot and mass production, and drive product design optimization and cost control. 职位概述 我们正在寻找一位富有创新精神的电力电子硬件工程师，加入我们的核心研发团队。您将主导新型电力系统中电力电子变换器的主拓扑设计、元器件选型与验证，直至产品成功量产。您是实现产品高性能、高可靠性及成本竞争力的关键力量。 主要职责 1. 主电路设计与仿真： 负责功率变换主拓扑的设计、论证与创新（如AC/DC, DC/DC, DC/AC等阶段）。 运用仿真工具（如PSPICE, LTspice, Saber, PLECS）进行电路仿真，包括环路稳定性分析、开关过程分析和损耗分析，为设计提供理论依据。 主导关键磁性元器件（如变压器、电感）的设计、计算与供应商技术对接。 2. 元器件选型、验证与寿命分析： 负责功率半导体（IGBT, SiC MOSFET, GaN HEMT）、电容、磁性元件等关键器件的选型、评估与测试。 制定元器件验证测试计划，深入分析器件特性、可靠性及潜在失效模式。 进行电路板的功耗与热分析，并与结构/散热工程师协作确保系统热设计达标。 3. 电路板设计与调试： 主导或深度参与原理图设计，制定PCB布局布线规则（特别是高压、大电流、敏感信号部分）。 指导Layout工程师完成PCB设计，确保其满足安规、EMC、散热及可制造性要求。 独立完成硬件单板调试，定位并解决硬件问题，对样机性能及可靠性进行全面验证。 4. 安规与EMC设计及合规性： 在硬件设计中严格贯彻安规标准（如UL1741, IEC62109），确保电气间隙、爬电距离等符合要求。 从设计源头考虑EMC问题，制定并实施EMC设计方案，主导产品前期预测试与正式认证测试的整改工作。 5. 测试验证与转产支持： 制定详细的硬件测试计划，完成设计验证、系统验证及可靠性测试。 分析测试数据，编写测试报告，并负责硬件设计文档的完整性与准确性。 支持新产品导入，解决试产及量产过程中的硬件技术问题，推动产品设计优化与成本控制。
We are seeking a seasoned industry expert in power electronics, specializing in the development of power electronics products and systems. The ideal candidate will possess a deep background in power electronics topology, control theory, precise loss calculation, modeling and simulation, and complex system design. This role will contribute significantly to the team in design delivery, technical problem-solving, and engineering implementation. Responsibilities: Design and develop power electronics converters for DC microgrid applications, such as Interlink Converters (AC/DC) and Battery Storage systems (DC/DC). Perform feasibility studies and design evaluations to ensure system functionality and reliability. Create system specifications and technical drawings using relevant design software. Collaborate with embedded software engineers to develop control strategies for power converters. Assist in preparing technical specifications, reports, and documentation for power converter projects. Research and implement new technologies to improve system efficiency and reliability. Ensure compliance with electrical standards and regulations. Collaborate with cross-functional engineering teams to integrate power electronics into overall system designs. Lead ODM teams to achieve design targets and ensure successful project outcomes.
- Follow Schneider Electric project process, Lead R&D team to develop new electronic products for industry application including the specification, product concept design, circuit design and simulation, prototype assembly and product verification so as to meet the offer requirement. - Cooperate with correlated team member and related teams such as PCB layout engineers, Mechanical engineers, Firmware/Software engineers, and EMC test engineers to fulfill the design and resolve technical issues. - Follow Schneider Electric design process and deliver the design documents with high quality on time - Focus on the Power Quality acting as technical leader for Reactive Power compensation, Active Power Filter, Thyristor switch&Controller, Power Factor Correction, SVG, DVR and Detuned Reactor. - Technical leader to drive the power quality new offer launch and maintain existing offer. - Co-operate with colleagues to achieve product development goal. - Support industrialization team to ensure the delivery of the mass production - Complete other jobs assigned by line manager or leaders
- Follow Schneider Electric project process, Lead R&D team to develop new electronic products for industry application including the specification, product concept design, circuit design and simulation, prototype assembly and product verification so as to meet the offer requirement. - Cooperate with correlated team member and related teams such as PCB layout engineers, Mechanical engineers, Firmware/Software engineers, and EMC test engineers to fulfill the design and resolve technical issues. - Follow Schneider Electric design process and deliver the design documents with high quality on time - Focus on the Power Quality acting as technical leader for Reactive Power compensation, Active Power Filter, Thyristor switch&Controller, Power Factor Correction, SVG, DVR and Detuned Reactor. - Technical leader to drive the power quality new offer launch and maintain existing offer. - Co-operate with colleagues to achieve product development goal. - Support industrialization team to ensure the delivery of the mass production - Complete other jobs assigned by line manager or leaders